1. Swing gate motor holds surface material of stainles steel,can be used for all types of stainless steel gates and iron gates.
2. DC 24V motor has over current detection and provide the best security.
3. Patent manual release function:toward the gate opening direction to rotate 90 degree and can easily perform the manual release function.
4. Automatic open and close time is adjustable.
5. At most 50 pcs remote controllers can be used for per set swing gate opener.
6. Can work with solar energy,no need complicated wiring settlement.
7. Can work with DC 24V backup battery for proper operation during power.
8. Optional parts: DC 24V outdoor lock (DS218),flashing light (UFO),photocell,push button,keypal system and extensional receiver box.
9. Easy installaton: No need to change the original design of the gate and gate post,no special requirement for the installation site.
|Power supply||AC 110V-240V|
|Operating voltage||DC 24V|
|Electronic Controller||Microcontroller based|
|Safety detection||Over current detection|
|Safety barrier||Infrared beam senor (optional)|
|Max.piston stroke||450 mm||350 mm||200 mm|
|Max.length of motor||1255 mm||1030 mm||730 mm|
|Max.leaf's weight||250 kg/leaf||300 kg/leaf||300 kg/leaf|
|Suitable leaf's length||2 to 3.5 meters/ leaf||1.5 to 2.5 meters/ leaf||1 to 1.6 meters/ leaf|
|Frame housing||Stainless steel / alumnium alloy||Stainless steel /alumnium alloy||Stainless steel / alumnium alloy|
|Driving method||Screw driven piston type||Screw driven piston type||Screw driven piston type|
|Opening degree||0 to 110 degree||0 to 110 degree||0 to 110 degree|
|90 degree rotation time||8 to 12 seconds||8 to 12 seconds||8 to 12 seconds|
|Temperature||-25°C to +55°C||-25°C to +55°C||-25°C to +55°C|
Standard Components for Electric Supply:
A few hardware parts
Standard Components for Solar Power:
2*Swing Gate motors;
1*Solar control box
1*20W solar panel with bracket
2*12V Back up batteries
A few hardware parts
1. Solar control system
2. Backup battery
4. Push button
5. Flashing light
6. Keypad system
7. Electric lock
8. Extensional receiver box
1. By courier.
2. By air.
3. By ship.
Sliding Gate Operator specification:
1)This type of remote door opener is our new developed product Integrated Mechanical and electrical, ie, with PCB inside and this is an innovative sliding gate operator, which Low stand-by consumption is the best design for solar charging.
2)One touch easy programing,The contronl system learns the open and closing limit automatically.
3)Electronic soft -start, ensures the motor stars steadily and smoothly.
4)Digital display makes Easy Programming.
5)Release key for power failure and looking the operator's cover.
6)Intelligent terminals for photocell, alarm lamp,external receiver, etc.
7)asy to install and maintain,Optional wire control remote control.
8)Mechanical limit switch (spring limit switch) or magnetic limit switch is optional.
9)Release key for power failure.
10)Optional line control or remote control.
Motor rotational speed:
Gate max weight:
Gear Box material:
A.Magnetic limit switch .
B.Aluminum alloy Gear Box.
C.Thermal protection at 125℃ built in motor winding.
D.In case of power failure,the gate can be opened and closed manually after release cluth.
E.Built-in control board.
F.Proection class IP55.
G.Operating environment Temperature: -20℃~+50℃
H.Terminals for Push button,Photocell,Flash lamp.
J.Auto-closing is available,time delay is adjustable.
BS-CONCISE Function Introduction
a,AC-PCB Built-in control board.
b,Wall switch,photocell,flash lamp
c,Working force is adjustable.
d,Delay time and running time are adjustable.
e,Over heat protection.
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.